CMS Document 13489-v2

HB phase-I production Calib Module, Pulser PCB

Document #:
CMS-doc-13489-v2
Document type:
Technical Data
Submitted by:
Stephen Corkill
Updated by:
Tullio Grassi
Document Created:
08 Feb 2018, 19:19
Contents Revised:
14 Feb 2018, 15:55
Metadata Revised:
28 Nov 2018, 07:30
Viewable by:
  • Public document
Modifiable by:

Quick Links:
Latest Version

Other Versions:
CMS-doc-13489-v1
09 Feb 2018, 04:21
Abstract:
Phase I HCAL HB LED Pulser board, which is part of the Calibration Unit (CU). PCB production and assembly done in India (TIFR responsability). See also the public info at the bottom of this page.
Files in Document:
Other Files:
Notes and Changes:
Added impedance spec to gerber zip files
Updated naming to include "HB". Previous versions identified HE only.
Related Documents:
  • CMS-doc-13458: HB phase-I production Calib Module, Mechanical Design
  • CMS-doc-13488: HB and HE phase-I production Calib Module, Pin Diode
  • CMS-doc-13292: JTAG adapter for HE CU
  • CMS-doc-12743: Phase I upgrade HE Calibration Module, Pin Diode Rev3.0
  • CMS-doc-12746: HE phase-I production Calib Module, Mechanical Design
  • CMS-doc-12498: Upgrade HE Prototype QIE card
  • CMS-doc-12742: Phase I, RBX, Calibration Module, QIE11, Adapter Card Rev 2.0
  • CMS-doc-11899: CERN FEASTMP DC-DC converters
Referenced by:
  • CMS-doc-13491: HB phase-I production Calib Module, Adapter Card
  • CMS-doc-13458: HB phase-I production Calib Module, Mechanical Design
  • CMS-doc-13488: HB and HE phase-I production Calib Module, Pin Diode
Publication Information:
FPGA FW: https://svnweb.cern.ch/trac/cms-firmwsrc/browser/hcal/HE_pulser
A capacitor (not shown in the design files nor in the BOM) has been added after the card assembly, see http://cmsonline.cern.ch/cms-elog/1063365 and https://docs.google.com/spreadsheets/d/1qBM05xfxuWzZggWGTkNCsol1J3xOJy0qEOu5kMBUSOQ/edit?pli=1#gid=38157944 .