JTAG programing adapter for HE CU: DESIGN ERROR

Document #:

CMS-doc-13119-v2

Document type:

Technical Data

Submitted by:

Tullio Grassi

Updated by:

Tullio Grassi

Document Created:

16 Jul 2016, 00:21

Contents Revised:

15 Nov 2016, 05:47

Metadata Revised:

28 Mar 2017, 15:29

Abstract:

!!!!!!! THE PCB DESCRIBED HERE HAS A DESIGN ERROR: THE CONNECTOR "X1" FOOTPRINT IS A MIRROR IMAGE OF WHAT IT SHOULD BE !!!!!!!!!

Corrected design: https://cms-docdb.cern.ch/cgi-bin/DocDB/ShowDocument?docid=13292

HE Calibration Unit (CU) JTAG programing adapter card. It is a port that allows JTAG connection to the Calibration Module’s QIE11 A3P1000L after installation in the RBX.

Files in Document:

• PCB BOM (QIE11 External JTAG _BOM(7-14-2016).xlsx, 11.1 kB)
• PCB Gerber files (HE_CU_JTAG_PCB_specs_July2016.zip, 98.2 kB)
• Schematic (QIE11 External JTAG.pdf, 61.5 kB)

Topics:

• HCAL:HCAL Upgrades:HCAL Phase I Upgrades
• HCAL
• Countries:USA:US Upgrades - Phase 1:Technical Scope
• Countries:USA:US Upgrades - Phase 1

Authors:

• Various Authors

Related Documents:

• CMS-doc-12746: HE phase-I production Calib Module, Mechanical Design
• CMS-doc-12498: Upgrade HE Prototype QIE card
• CMS-doc-12742: Phase I, Calibration Module Adapter Card Rev 2.0
• CMS-doc-12721: Phase I HE Pulser card
• CMS-doc-12983: CMS HE external JTAG programming of the Bridge FPGA

Referenced by:

• CMS-doc-12746: HE phase-I production Calib Module, Mechanical Design