Phase I HE Pulser card

Document #:

CMS-doc-12721-v9

Document type:

Technical Data

Submitted by:

Russell D. Taylor

Updated by:

Russell D. Taylor

Document Created:

06 Oct 2015, 18:26

Contents Revised:

25 May 2016, 07:50

Metadata Revised:

25 May 2016, 07:50

Abstract:

Design Documentation for the Phase I HCAL HE LED Pulser board

Files in Document:

• HE Pulser Bill of Materials (HE Pulser Rev3.1 BOM.xlsx, 13.7 kB)
• HE Pulser Datasheet (HE Pulser Board Rev 2_2 Datasheet.pdf, 278.9 kB)
• HE Pulser Gerber files (HE Pulser Rev3 Gerber files.zip, 1.9 MB)
• HE Pulser Libero SoC V11.5 FPGA files (HE_Pulser_Rev3_1_LiberoSoC_11.5_files_CMS12721.zip, 11.3 MB)
• HE Pulser Schematic (HE Pulser Rev3.1.pdf, 284.7 kB)
• HE Pulser Test specification (HE Pulser Board Rev 2_2 Test Specifications.pdf, 398.1 kB)

Other Files:

• HE_Pulser_informal_review_May2016.txt (7.1 kB)
• Assembly instructions (Special PCB instructions for HE Pulser Rev3.1.docx, 1.6 MB)
• Bare Substrate Electrical Test Data IPC file (HE Pulser Rev2_2.ipc, 136.5 kB)
• Part centroids CSV (HE Pulser Rev3 - Part centroids.txt, 23.2 kB)

Topics:

• HCAL:HCAL Upgrades:HCAL Phase I Upgrades
• HCAL:HCAL Electronics
• HCAL
• Countries:USA:US Upgrades - Phase 1:Technical Scope
• HCAL:HCAL Upgrades
• Countries:USA:US Upgrades - Phase 1

Authors:

• Russell D. Taylor

Notes and Changes:

Assembly instructions now identifies R99, R100, R102 as not populated for production run PCBs

Related Documents:

• CMS-doc-12743: Phase I upgrade HE Calibration Module, Pin Diode Rev3.0
• CMS-doc-12746: HE phase-I production Calib Module, Mechanical Design
• CMS-doc-12498: Upgrade HE Prototype QIE card
• CMS-doc-12742: Phase I, Calibration Module Adapter Card Rev 2.0
• CMS-doc-11899: CERN FEASTMP DC-DC converters

Referenced by:

• CMS-doc-13119: JTAG programing adapter for HE CU: DESIGN ERROR
• CMS-doc-12743: Phase I upgrade HE Calibration Module, Pin Diode Rev3.0
• CMS-doc-12756: v2.2 Backplane simulator card for Phase I HE Pulser card
• CMS-doc-13488: HB and HE phase-I production Calib Module, Pin Diode
• CMS-doc-12742: Phase I, Calibration Module Adapter Card Rev 2.0