Phase I HE Pulser card

Document #:

CMS-doc-12721-v8

Document type:

Technical Data

Submitted by:

Russell D. Taylor

Updated by:

Russell D. Taylor

Document Created:

06 Oct 2015, 18:26

Contents Revised:

19 May 2016, 18:21

Metadata Revised:

19 May 2016, 18:21

Abstract:

Design Documentation for the Phase I HCAL HE LED Pulser board

Files in Document:

• HE Pulser Bill of Materials (HE Pulser Rev3.1 BOM.xlsx, 13.7 kB)
• HE Pulser Datasheet (HE Pulser Board Rev 2_2 Datasheet.pdf, 278.9 kB)
• HE Pulser Gerber files (HE Pulser Rev3 Gerber files.zip, 1.9 MB)
• HE Pulser Libero SoC V11.5 FPGA files (HE_Pulser_Rev3_1_LiberoSoC_11.5_files_CMS12721.zip, 11.3 MB)
• HE Pulser Schematic (HE Pulser Rev3.1.pdf, 284.7 kB)
• HE Pulser Test specification (HE Pulser Board Rev 2_2 Test Specifications.pdf, 398.1 kB)

Other Files:

• Assembly instructions (Special PCB instructions for HE Pulser Rev3.1.docx, 1.6 MB)
• Bare Substrate Electrical Test Data IPC file (HE Pulser Rev2_2.ipc, 136.5 kB)
• Part centroids CSV (HE Pulser Rev3 - Part centroids.txt, 23.2 kB)

Topics:

• HCAL:HCAL Upgrades:HCAL Phase I Upgrades
• HCAL:HCAL Electronics
• HCAL
• Countries:USA:US Upgrades - Phase 1:Technical Scope
• HCAL:HCAL Upgrades
• Countries:USA:US Upgrades - Phase 1

Authors:

• Russell D. Taylor

Notes and Changes:

HE Pulser Rev3.1 Only resistor value changes to FEASTMP PGood signals. See HE Pulser Schematic page 7.
HE Pulser firmware Rev3.1 includes firmware version code in command byte upon I2C read

Related Documents:

• CMS-doc-12743: Phase I upgrade HE Calibration Module, Pin Diode Rev3.0
• CMS-doc-12746: HE phase-I production Calib Module, Mechanical Design
• CMS-doc-12498: Upgrade HE Prototype QIE card
• CMS-doc-12742: Phase I, Calibration Module Adapter Card Rev 2.0
• CMS-doc-11899: CERN FEASTMP DC-DC converters

Referenced by:

• CMS-doc-13119: JTAG programing adapter for HE CU: DESIGN ERROR
• CMS-doc-12743: Phase I upgrade HE Calibration Module, Pin Diode Rev3.0
• CMS-doc-12756: v2.2 Backplane simulator card for Phase I HE Pulser card
• CMS-doc-13488: HB and HE phase-I production Calib Module, Pin Diode
• CMS-doc-12742: Phase I, Calibration Module Adapter Card Rev 2.0